国产成人无码18禁午夜福利免费

    <tbody id="ic989"><nobr id="ic989"><td id="ic989"></td></nobr></tbody>

      <nobr id="ic989"><optgroup id="ic989"></optgroup></nobr>
            1. <bdo id="ic989"><dfn id="ic989"></dfn></bdo>

            2. 详细说明

              SZE-24YCA 2

              收藏
              • 产品说明

              20170314185382508250.jpg

                本機特點:

                PLC控制,油馬達預塑,全液壓驅動,自動循環;

                塑化能力高,塑化溫度可預選自控。

                采用24點計量,使用時根據各工位模具要求,選定注射量。

                設有空模選擇功能。采用變頻轉位。

                采用單缸直拉雙聯板剪式合模機構。

                設有二次壓力注射。設有先后壓楦,合模順序的選擇功能。

                圓盤轉位平穩,快慢調整方便。

                圓盤轉位與塑化,注射工作供油分開控制。

                工位多,定型時間長,易保證鞋底成型質量。

                可選配伺服節能系統, 可節省電量30%左右。

                Structure characteristics:

                PLC controlled,pre plasticized by hydraulic motor,driven by full hydraulic pressure,and cycled automatically.

                High plastifying capacity,the plastifying temperature can be controlled automatically by preselection.

                It adopts 24 points measuring and the injection volume can be chosen according to the requirements of the moulds at each working position.

                The function of empty mould selection has been provided.

                Parallel mould plate closing mechanism is adopted,which linked with a toggle system operated by single cylinder.

                The machine is equipped with two time pressure injection system and the cramp pressing and mould closing order selecting function.

                The round table indexes smoothly and it’s movement can easily be adjusted.

                The round table rotation,plasticizing and oil supply for the injection are controlled independently.

                There are many working positions,the time for setting is longenough,andguarantees the setting quality of shoe soles.

                Selecting servo energy conservation system to save about 30% energy.

                主要技術參數:

              項目/ITEM

              單位/UNIT

              規格/SPECIFICATION

              SZE-24YCA

              2SZE-24YCA

              工位數        Number of stations

              Station

              24

              24

              螺桿直徑      Screw Diameter

              mm

              75

              75 ,70

              螺桿轉速      Screw rotating speed

              r/min

              0-160

              0-160

              螺桿長徑比    Screw length and diameter ratio


              19:1

              19:1 , 18:1

              最大注射容積  Max injection capacity

              cm3

              660

              660 ,580

              塑化能力      Plastifying capacity

              g/s

              40

              40

              注射壓力      Injection pressure

              Mpa

              5.0

              5.0

              圓盤壓力      Disc pressure

              Mpa

              3.0

              3.0

              合模方式      Clamp mould style


              剪式/Scissors

              剪式/Scissors

              提楦行程      Last trip

              mm

              60

              60

              鞋楦高度      Shoe cramp height

              mm

              210-260

              210-260

              ?虺叽      Mould frame dimensions

              mm(LxWxH)

              340x180x60

              340x180x60

              電機功率      The motor power

              KW

              21.5

              36.5

              整機外形尺寸  Outline dimensions of the whole machine

              mm(LxWxH)

              7300x3940x1955

              8400x6800x1955

              整機重量      Total weight of the whole machine

              kg

              13500

              15500

                以上技術規格僅供參考,如有任何變更或修改,恕不另行通知。

                Technical specifications are indicative.Machines may undergo variations and/or modifications whithout any previous notice.

              咨詢電話:0711-3355178

              地址:鄂州市凡口經濟開發區順合路42號

              微信二維碼

              公眾號

              技术支持: 萬家推云平臺 | 管理登录
              ×
              seo seo

                <tbody id="ic989"><nobr id="ic989"><td id="ic989"></td></nobr></tbody>

                  <nobr id="ic989"><optgroup id="ic989"></optgroup></nobr>
                        1. <bdo id="ic989"><dfn id="ic989"></dfn></bdo>